Metrohm tiBase 1.0 Manual Manuel d'utilisateur

tiBase 1.0Online help8.101.8025EN

1.2 Application￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2￭￭￭￭￭￭￭￭tiBase 1.01.2 ApplicationtiBase is a database program for administrating data on the basis of PC/LIMS

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭92￭￭￭￭￭￭￭￭tiBase 1.0[New]Adds a new backup directory (see Chapter 3.2.3.2.2, page 92).[Edit]Edits the selected

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭933.2.3.2.3 Edit backup directoryDialog window: Configuration ▶ Tools ▶ Program administration

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭94￭￭￭￭￭￭￭￭tiBase 1.0Computer nameShows the name of the computer on which the client has been installed.StatusS

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭953.3 Configuration data3.3.1 Export/Import3.3.1.1 Export configuration dataDialog window: C

3.3 Configuration data￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭96￭￭￭￭￭￭￭￭tiBase 1.0User administrationon | off (Default value: on)Exports saved user administration (see

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭97Export templateon | off (Default value: on)Export the saved export template Security settings

3.3 Configuration data￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭98￭￭￭￭￭￭￭￭tiBase 1.0IntervalEntry of the time interval after which an automatic backup will take place.Aft

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭99NoteIf the backup directory is on a network drive, the backup date should beadded manually to

3.3 Configuration data￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭100￭￭￭￭￭￭￭￭tiBase 1.03.3.3 Options3.3.3.1 Options - OverviewDialog window: Configuration ▶ Tools ▶ Optio

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭101Database settingson | off (Default value: off)Switches Save database view on/off when exitin

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭1 IntroductiontiBase 1.0￭￭￭￭￭￭￭￭31.4 Connecting devicesIntroductionPC/LIMS reports can be read into tiBase from:￭ Titrino plus

3.4 Subwindow Import processes￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭102￭￭￭￭￭￭￭￭tiBase 1.03.4.2 Import processes - TableSubwindow: Configuration ▶ Import processesTab

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭103stoppedThe import process has been stopped manually or automatically by anerror. The status

3.5 Subwindow Import protocol￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭104￭￭￭￭￭￭￭￭tiBase 1.0Start automaticallyon | off (Default value: on)If this check box is activated,

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭105￭ Drag the margin between column titles:Sets the column width￭ Double-click on the margin be

3.5 Subwindow Import protocol￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭106￭￭￭￭￭￭￭￭tiBase 1.0DetailsDetailed information on the log entry.FunctionsThe menu Edit beneath th

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭1074 Database4.1 Database - General4.1.1 Database - DefinitionProgram part: DatabaseDefinitionThe

4.1 Database - General￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭108￭￭￭￭￭￭￭￭tiBase 1.0ElementsThe desktop of the program part Database comprises the following ele-ments:￭

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭109Report…PDF file output of the report (see Chapter 4.5.2.12, page 245).Logout...Logout user (see C

4.1 Database - General￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭110￭￭￭￭￭￭￭￭tiBase 1.04.1.3.5 Database - Menu DeterminationsProgram part: DatabaseComment...Enter comment

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭111Control chart… Display control chart and statistical evaluation of the selected determination (se

1.6 Communication￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4￭￭￭￭￭￭￭￭tiBase 1.0￭ Automatic database backup (see Chapter 4.3.5.4, page 124).￭ Control cards (see Chapter 4.5

4.1 Database - General￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭112￭￭￭￭￭￭￭￭tiBase 1.04.1.4 Database - Toolbar Program part: DatabaseOpen…Open database (see Chapter 4.2.1

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭113Import...Import selected determinations (*.txt or *.tdet)Sign/Signature 1…Sign selected determina

4.1 Database - General￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭114￭￭￭￭￭￭￭￭tiBase 1.0PresentationThe subwindows can be enlarged or made smaller to suit by dragging thesep

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭1154.1.7 Views4.1.7.1 Views - General Program part: Configuration / DatabaseDefinitionThe term Vie

4.1 Database - General￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭116￭￭￭￭￭￭￭￭tiBase 1.0Export/ImportViews can also be exported and imported. In this way these views can bee

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭117[Rename]Rename the selected view.[Delete]Delete the selected view.[Load]Load the selected view.4.

4.2 Database display￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭118￭￭￭￭￭￭￭￭tiBase 1.04.2 Database display4.2.1 Open databaseDialog window: Database ▶ File ▶ Open… ▶ Open

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭119NoteA maximum of 4 databases can be opened, but only 2 can be displayedat the same time. Database

4.3 Manage databases￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭120￭￭￭￭￭￭￭￭tiBase 1.04.2.3 Display single databaseMenu item: Database ▶ View ▶ UnsplitIn the default settin

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭121NameName of the database.Number of recordsShows the number of data sets in the database.SizeShows

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭1 IntroductiontiBase 1.0￭￭￭￭￭￭￭￭5against further modifications. It is thus possible to mirror customized work-flows in tiBase .A

4.3 Manage databases￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭122￭￭￭￭￭￭￭￭tiBase 1.04.3.2 Create new databaseDialog window: Database ▶ File ▶ Database manager… ▶ Database

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭123NoteDatabases that are open cannot be deleted.4.3.5 Database properties4.3.5.1 Database propert

4.3 Manage databases￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭124￭￭￭￭￭￭￭￭tiBase 1.0Modified byShows the name of the user (abbreviation) who carried out the modifica-tions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭125Next backupDate at which the next backup must take place. The date can be selectedby pressing i

4.3 Manage databases￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭126￭￭￭￭￭￭￭￭tiBase 1.0Monitoring sizeon | off (Default value: off)Enables/disables size monitoring for the se

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭127NoteMake sure that you have read and write access rights on the selecteddirectory.Backup nameSele

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭128￭￭￭￭￭￭￭￭tiBase 1.0Database nameShows the name of the database. If the backup file is located on a networkdrive,

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭129NameName of report template.SavedDate and time when the report template was saved.Saved byShort n

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭130￭￭￭￭￭￭￭￭tiBase 1.04.4.1.1.3 Copy report templateMenu item: Database ▶ Tools ▶ Report templates ▶ Manager... ▶ R

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭131List of report templatesThe list of report templates contains information about all the saved rep

1.9 Online help￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭6￭￭￭￭￭￭￭￭tiBase 1.01.9 Online helpIntroductionCalling up the HelptiBase has an extensive and detailed online he

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭132￭￭￭￭￭￭￭￭tiBase 1.0￭ Form reportIn the Form report the report section always includes the whole areabetween the h

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭1334.4.1.4.1.3.2 Report template - Menu FileProgram window: Database ▶ Report templateSaveSave an o

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭134￭￭￭￭￭￭￭￭tiBase 1.0Last pageShows the last page of the report template (see Chapter 4.4.1.4.2.4, page 139).4.4.1.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭135Select zoom level (see Chapter 4.4.1.4.2.7, page 142).GridSwitch the grid display on and off (see

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭136￭￭￭￭￭￭￭￭tiBase 1.0Group field If this option is enabled then group fields can be inserted in the report template

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭137SettingsSelectionApply to current page | Apply to all pagesDefault valueApply to current pageAppl

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭138￭￭￭￭￭￭￭￭tiBase 1.0Range0.0 ... 499.0 mmDefault value15.0 mmLeftLeft-hand page margin.Range0.0 ... 499.0 mmDefaul

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭139Defining sections for tabular reportThe header, footer and report sections can be enlarged and re

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭140￭￭￭￭￭￭￭￭tiBase 1.0NavigatingIn report templates with several pages the navigation bar can be used toswitch to th

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭141￭ FooterText field, Date field, Time field, Page number, Number of pages,Image, Line, Rectangle4.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭72 General program functions2.1 Program parts2.1.1 Program partsGeneral program

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭142￭￭￭￭￭￭￭￭tiBase 1.0Edit module propertiesOpen the properties window for the selected module. Alternatively thepro

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭143Selecting determinationIf several determinations have been selected for the report display then t

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭144￭￭￭￭￭￭￭￭tiBase 1.0GridX distanceGrid distance in X-direction.Range1.0 ... 100.0 mmDefault value5.0 mmY distanceG

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭145NameName of report template.SavedDate and time when the report template was saved.Saved byShort n

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭146￭￭￭￭￭￭￭￭tiBase 1.0Range0.0000 ... (max. page width) mmY pos.y-position within the permitted section.Range0.0000

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭147Fills the field with dots.TextEntry of text for the text field.4.4.1.4.3.2 Report template - Dat

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭148￭￭￭￭￭￭￭￭tiBase 1.0Color selection.Bold.Italic.Underlined.Left-justified.Centered.Right-justified.Switches line b

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭149PreviewShows a formatted example of text.4.4.1.4.3.3 Report template - Date field Program window

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭150￭￭￭￭￭￭￭￭tiBase 1.0Bold.Italic.Underlined.Left-justified.Centered.Right-justified.Fills the field with dots.Prefi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭151PropertiesX pos.x-position within the permitted section.Range0.0000 ... (max. page width) mmY pos

2.2 Login/password protection￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭8￭￭￭￭￭￭￭￭tiBase 1.0shown in color. The upper left corner of the symbol contains a black fielddispla

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭152￭￭￭￭￭￭￭￭tiBase 1.0Right-justified.Fills the field with dots.PrefixText placed in front of the contents of the ti

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭153HeightHeight of the page number field.Range0.0000 ... (max. page height) mmSelection of the avail

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭154￭￭￭￭￭￭￭￭tiBase 1.0PreviewShows the formatted page number.4.4.1.4.3.6 Report template - Number of pages Program

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭155Bold.Italic.Underlined.Left-justified.Centered.Right-justified.Fills the field with dots.PrefixTe

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭156￭￭￭￭￭￭￭￭tiBase 1.0PropertiesX pos.Shows the predefined x-position for the fixed report.Y pos.Y position within t

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭1574.4.1.4.3.8 Report template - Group fieldProgram window: Database ▶ Report templateA group field

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭158￭￭￭￭￭￭￭￭tiBase 1.04.4.1.4.3.9 Report template - Image Program window: Database ▶ Report templateAn image field

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭159proportionalProportional enlargement or diminishment.non-proportionalNon-proportional enlargement

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭160￭￭￭￭￭￭￭￭tiBase 1.0Selection of the type of line.4.4.1.4.3.11 Report template - Rectangle Program window: Databa

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭161Switches the fill color on and off.Selection of the fill color.4.4.1.4.3.12 Report template - Cu

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭9Recommended settingsOn the tab Login/Password protection in the dialog window Secu

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭162￭￭￭￭￭￭￭￭tiBase 1.0Command typeShows the command type for which a curve is to be produced.SelectionDET | MET | SE

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭1634.4.1.4.3.13 Report template - Calibration curve fieldProgram window: Database ▶ Report template

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭164￭￭￭￭￭￭￭￭tiBase 1.04.4.2 Curve overlay templates4.4.2.1 Manage curve overlay templatesMenu item: Database ▶ Too

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭1654.4.2.2 Edit curve overlay templates4.4.2.2.1 Curve overlay - PropertiesDialog window: Database

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭166￭￭￭￭￭￭￭￭tiBase 1.04.4.2.2.2 Curve overlay - x axisDialog window: Database ▶ Tools ▶ Templates ▶ Curve overlay t

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭167Input25 charactersDefault valueautoDisplay measuring pointson | off (Default value: on)If this ch

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭168￭￭￭￭￭￭￭￭tiBase 1.0Grid colorSelection of the grid line color.SelectionColor selection | grayDefault valuegraySho

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭169Show only last curveOnly the curve generated during the last run of the command is displayed.Show

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭170￭￭￭￭￭￭￭￭tiBase 1.0[Delete]Delete template.[Copy]Copies the template and saves it under the name Copy of...4.4.3

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭171LabelFreely definable axis label for the y axis.Input25 charactersDefault valueResultBackgroundBa

2.2 Login/password protection￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭10￭￭￭￭￭￭￭￭tiBase 1.0NoteUsers who log in for the first time or users whose status has been resetfro

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭172￭￭￭￭￭￭￭￭tiBase 1.0Upper limitUpper warning limit.Input10 digitsRange-1.0E8 ... 1.0E8 (max. 10 digits) Interventi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭1734.4.3.2.5 Control chart template - CommentDialog window: Database ▶ Tools ▶ Templates ▶ Control

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭174￭￭￭￭￭￭￭￭tiBase 1.0[Copy]Copies the selected export template and saves under the name Copyof….4.4.4.2 Edit expor

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭175*.xml (XML format)Data exchange format with XML code that can be imported into corre-sponding PC

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭176￭￭￭￭￭￭￭￭tiBase 1.0Sample identificationIf this option is selected then the name of the export file will be forme

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭177Remove selected field.Modifies the sequence of the exported fields by moving the selected fieldup

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭178￭￭￭￭￭￭￭￭tiBase 1.0Field separatorSelection of the field separator.Selection; | , | TabDefault value;4.4.4.2.5 E

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭179–<DeterminationReport>Determination report<xmlCreator val=""/>Program name&

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭180￭￭￭￭￭￭￭￭tiBase 1.04.4.4.3.1 XML export - Determination dataXML export– <Determination>Determination data–

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭181<progVersion val=""/>Program version and build number of the program atrecording

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭11[Change password]This button in the dialog window Login opens the window Change p

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭182￭￭￭￭￭￭￭￭tiBase 1.0<msgSource val=""/>Message source:Shows from where the message comes:ProgramMe

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭183</data> </SystemVars> </Miscellaneous> – <signOff dynamic="">Si

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭184￭￭￭￭￭￭￭￭tiBase 1.0</Identification>– <Version>Information about method version.<signOffState val=

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭185– <signature> <vr val=""/> Shows at which level the method has been signed

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭186￭￭￭￭￭￭￭￭tiBase 1.04.4.4.3.4 XML export - Results overviewXML export– <Results dynamic="">Result

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭187</data> </fv> – <sme>Mean value of the result.– <data> <vr val="&

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭188￭￭￭￭￭￭￭￭tiBase 1.0<rel> -<max> – <data> <vr val="" /> <vf val=""

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭189<vs val=""/>Result status:OK = The value is ok and has not been monitored.OKL = T

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭190￭￭￭￭￭￭￭￭tiBase 1.0<sme> – <abs>Absolute standard deviation of the result.– <data> <vr val=&

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭191</data> <RS01> <RS02> … <RS25>Further single results (see above)</Resu

2.3 Electronic signatures￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭12￭￭￭￭￭￭￭￭tiBase 1.0￭ Sign at Level 2Level 2 can only be signed if signatures already exist at Level 1.

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭192￭￭￭￭￭￭￭￭tiBase 1.0<sensorType val="" />Sensor type.<sensorOrderNo val="" />Order

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭193<<RowDesc val="" />Column header for buffers/standards.<NominalVal val=&quo

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭194￭￭￭￭￭￭￭￭tiBase 1.0– <body dynamic=""> – <data> <RowDesc> ... </RowDesc>Measuri

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭195</data> </EndPoints> </Command> </CommandData> 4.4.4.3.7 XML export - Co

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭196￭￭￭￭￭￭￭￭tiBase 1.04.4.4.3.8 XML export - Device dataXML export– <usedDevices dynamic="">Device

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭197– <dosPortName> ... </dosPort-Name>Number of the MSB connector the dosing device was

4.4 Templates￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭198￭￭￭￭￭￭￭￭tiBase 1.0– <remotePortName> ... </remo-tePortName>Number of the MSB connector the Remote Bo

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭199<sensorCalMethod val="" />Calibration method.<sensorCalUser val="" /

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭200￭￭￭￭￭￭￭￭tiBase 1.0– <th> <vr val="" />Column header.</th> </tableHea

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭201If the value of a result is monitored and lies within the limits defined, thenit will be shown in

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭13ModifyModifyNot sigendSign (1)Signed 1Sign (2)Sigend 2Delete signatures 2DeleteCr

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭202￭￭￭￭￭￭￭￭tiBase 1.0Available columnsShows all the fields that can be shown as columns in the determi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭203Temporary filterThe table is filtered according to the last defined, not saved Special fil-ter.Fi

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭204￭￭￭￭￭￭￭￭tiBase 1.04.5.1.6 Determination overview - Table navigation Subwindow: Database ▶ Determin

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭2054.5.1.7 Determination overview - Data record selection Subwindow: Database ▶ Determination overv

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭206￭￭￭￭￭￭￭￭tiBase 1.0Search and filter determinations￭ Search determinations￭ Filter determinationsOth

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭2074.5.2.3 Searching for determinationsDialog window: Database ▶ Determinations ▶ Search... ▶ Searc

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭208￭￭￭￭￭￭￭￭tiBase 1.0invalidIt is being searched for values with the entry invalid .outside limitsIt i

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭209for fields of the type = DateInputall possible date valuesDefinition of a date as search word. Th

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭210￭￭￭￭￭￭￭￭tiBase 1.04.5.2.4 Filter determinations4.5.2.4.1 Filter determinations - Overview Subwind

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭211FilterSelects the filter to be loaded for processing.Selection'Filter name' | New filte

2.3 Electronic signatures￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭14￭￭￭￭￭￭￭￭tiBase 1.0Signature 1 not possible (signature 2 exists)The selected determination can no long

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭212￭￭￭￭￭￭￭￭tiBase 1.0[Apply filter]Applies filter criteria to Determination table.4.5.2.4.5 Determina

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭213LinkSelection of the logic operator with the previous filter criterion.SelectionAND | ORDefault v

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭214￭￭￭￭￭￭￭￭tiBase 1.0TodayA search is made for the current date. In addition, a range of days canalso

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭215Match caseon | off (Default value: off)If this check box is activated then upper/lower case will

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭216￭￭￭￭￭￭￭￭tiBase 1.04.5.2.5.2 Signature Level 1Dialog window:Database ▶ Determinations ▶ Sign ▶ Sign

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭217ReasonSelection from the Default reasons defined in the Security Settings dia-log window for the

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭218￭￭￭￭￭￭￭￭tiBase 1.0Signature not possible (accessed by other client)The selected determination canno

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭219UserShort name of the user who signed the determination.Full nameFull name of the user who signed

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭220￭￭￭￭￭￭￭￭tiBase 1.0NoteSignatures 2 can only be deleted if the user belongs to a user group withthe

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭221￭ ModificationsModification of variables, method, statistics, curve evaluation￭ Result viewShows

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭15NoteDeterminations that can be signed at level 2 are blocked, i.e. they canneithe

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭222￭￭￭￭￭￭￭￭tiBase 1.04.5.2.6.3 Reprocessing rulesDialog window: ReprocessThe following rule applies f

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭223include: the method variables FCT (factor) and DIV (divisor), the sample datavariables C00 (sampl

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭224￭￭￭￭￭￭￭￭tiBase 1.0Formula lines can be deleted according to normal rules ([Delete]), copied([Ctrl+C

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭225Functions[New]Opens the dialog window Result 'Resultname' - RS# (see Chapter4.5.2.6.4.7

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭226￭￭￭￭￭￭￭￭tiBase 1.0[Determination on/off]All single results of the selected determination for statis

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭2274.5.2.6.4.6 Curve evaluation4.5.2.6.4.6.1 Modifications - Curve evaluationTab: Database ▶ Deter

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭228￭￭￭￭￭￭￭￭tiBase 1.0Set EP with intersection linesBy moving the mouse a point on the curve is selecte

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭229ZoomingBy drawing out a rectangle with the left mouse button the selectedarea can be zoomed.Reset

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭230￭￭￭￭￭￭￭￭tiBase 1.0EP#Endpoint that has been determined automatically by potentiometric eval-uation

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭2314.5.2.6.4.6.4 Curve evaluation - Properties4.5.2.6.4.6.4.1 Properties curve evaluation - Overvi

2.3 Electronic signatures￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭16￭￭￭￭￭￭￭￭tiBase 1.0NoteDeterminations can only be signed at level 2 if the user belongs to a usergroup

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭232￭￭￭￭￭￭￭￭tiBase 1.0autoThe designation from the field Size will be used.ScalingFixed scaling of the

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭233Selection50 characters | autoDefault valueautoautoThe designation from the field Size will be use

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭234￭￭￭￭￭￭￭￭tiBase 1.0Symbol colorSelection of the color for the measuring point symbol.Selection13 col

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭235SizeSelectionCommand-dependent selection | offDefault valueoffCommand-dependent selectionSelectio

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭236￭￭￭￭￭￭￭￭tiBase 1.0SmoothingSmoothingon | off (Default value: on)Switches smoothing on/off for the c

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭237Selection5 line typesGrid colorSelection of the grid line color.Selection13 colors | grayDefault

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭238￭￭￭￭￭￭￭￭tiBase 1.0Selection13 colors | light greenDefault valuelight greenAuxiliary linesSelection

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭239Input16 charactersDefault valueemptyDecimal placesNumber of decimal places for the output of the

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭240￭￭￭￭￭￭￭￭tiBase 1.0Input10 digitsDefault value0Upper limitUpper limit for the result. This parameter

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭241NavigationIf several determinations are selected for reprocessing then the navigationbuttons can

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭172.4 Formula editorDialog window: Formula editorThe Formula editor serves as a su

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭242￭￭￭￭￭￭￭￭tiBase 1.0Reason must be selected and a Comment on the modification must beentered.ReasonSe

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭2434.5.2.8 Exporting determinationsDialog window: Database ▶ Determinations ▶ Export... ▶ Export de

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭244￭￭￭￭￭￭￭￭tiBase 1.0NoteIf a database is opened simultaneously on several clients and if determi-nati

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭245[OK]The determination table is produced in the required format as a PDF file andopened directly w

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭246￭￭￭￭￭￭￭￭tiBase 1.0Output targetPrinteron | off (Default value: on)If this check box is activated, t

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭2474.5.2.15 Determinations - Show calibration curveDialog window: Database ▶ Determinations ▶ Show

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭248￭￭￭￭￭￭￭￭tiBase 1.04.5.2.16 Determinations - Control chartDialog window: Database ▶ Determinations

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭249SelectionStandard | "Template" | Last saved templateDefault valueLast saved templateIf

4.5 Determination overview￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭250￭￭￭￭￭￭￭￭tiBase 1.0OrientationSelectionPortrait | LandscapeDefault valueLandscapePortraitProduces co

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭2514.6 Subwindow Information4.6.1 Information - Overview Subwindow: Database ▶ InformationGeneral

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭18￭￭￭￭￭￭￭￭tiBase 1.0Subtraction Greater than Logic ORMultiplication Less than Round parenthesesDivision Not eq

4.6 Subwindow Information￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭252￭￭￭￭￭￭￭￭tiBase 1.0RecordingInformation about recording the determination.Determination start:Date an

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭253Reprocessed by (short name):Short name of user logged in when determination was reprocessed. If a

4.6 Subwindow Information￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭254￭￭￭￭￭￭￭￭tiBase 1.0Method name:Name of the method.Method ID:Unambiguous identification for the method

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭255Signature date:Date and time at which the method was signed.Signed by (short name):Short name of

4.6 Subwindow Information￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭256￭￭￭￭￭￭￭￭tiBase 1.0Device 'Software name'Information about the device used (only the existi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭257Measuring input:Number of the measuring input (+ designation iConnect for intelligent sen-sors).A

4.6 Subwindow Information￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭258￭￭￭￭￭￭￭￭tiBase 1.0Solution 'Solution name'Solution name:Name of the solution.Concentration

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭259E (0):Electrode zero point of the sensor used (in mV only for ISE).c (blank):Blank value of the I

4.7 Subwindow Results￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭260￭￭￭￭￭￭￭￭tiBase 1.04.7 Subwindow Results4.7.1 Results - GeneralSubwindow: Database ▶ ResultsIn the subw

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭261NoteOnly the last results having been calculated will be shown. For example,if there are several

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭19 Absolute standarddeviationRelative standard devi-ation (in %)The statistical ca

4.7 Subwindow Results￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭262￭￭￭￭￭￭￭￭tiBase 1.04.7.3 Results - Raw dataTab: Database ▶ Results ▶ ResultsOn the tab Raw data the eval

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭263Table 3 Command DET IpolColumn 2: Variable Column 3 Column 4 Column 5 Column 6EP#EP#.VOL , mL , 4

4.7 Subwindow Results￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭264￭￭￭￭￭￭￭￭tiBase 1.0Table 7 Command MET IpolColumn 2: Variable Column 3 Column 4 Column 5 Column 6EP#EP#.V

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭265Table 11 Command SET IpolColumn 2: Variable Column 3 Column 4 Column 5 Column 6EP#EP#.VOL , mL ,

4.7 Subwindow Results￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭266￭￭￭￭￭￭￭￭tiBase 1.0Table 15 Command KFCColumn 2: Variable Column 3 Column 4 Column 5 Column 6EPEP.MEA , m

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭267Column 2: Variable Column 3 Column 4 Column 5 Column 6FP#FP#.MEA , pH , 3 FP#.TIM , s , 1 FP#.TEM

4.7 Subwindow Results￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭268￭￭￭￭￭￭￭￭tiBase 1.0Column 2: Variable Column 3 Column 4 Column 5 Column 6FP#FP#.MEA , °C , 3 FP#.TIM , s

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭269Table 28 Command CAL LOOP ConcColumn 2: Variable Column 3 Column 4 Column 5 Column 6SLOSLO , mV ,

4.7 Subwindow Results￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭270￭￭￭￭￭￭￭￭tiBase 1.0Result "Result name"Result "Result name"Display of the result with

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭271Assignment:Assigns the result to one of the result columns RS01...RS25 in the Deter-mination over

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭20￭￭￭￭￭￭￭￭tiBase 1.02.4.3 Variables2.4.3.1 Variables - Overview Dialog window: Formula editorVariables are

4.8 Subwindow curves￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭272￭￭￭￭￭￭￭￭tiBase 1.0Statisticson | off (Default value: off)Shows the statistics results.Assignmenton | off

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭273undone with a double-click on the section of the graph or with the context-sensitive menu command

4.8 Subwindow curves￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭274￭￭￭￭￭￭￭￭tiBase 1.0Command typeSelection of the command type for which the curve properties are to bedefi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭275For KFC commandsSelectionTime [s] | Measured value | Amount [µg] |Charge [mAs] | Drift [µg/min] |

4.8 Subwindow curves￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭276￭￭￭￭￭￭￭￭tiBase 1.04.8.3.3 Curve properties - y1 axisDialog window: Database ▶ Curves ▶ Properties curve

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭277For SET, STAT, DOS and KFT commandsSelectionTime [s] | Measured value | Volume [mL] | dV/dt[µL/mi

4.8 Subwindow curves￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭278￭￭￭￭￭￭￭￭tiBase 1.0Only editable when autoscaling is disabled.Range-1.00E+12 ... +1.00E+12 Default value1

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭279Smoothing factor y-axisFactor for smoothing on the y axis.Range0.01 ... 1000 Default value0.01 Sh

4.8 Subwindow curves￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭280￭￭￭￭￭￭￭￭tiBase 1.0For DET commandsSelectionVolume [mL] | Measured value | ERC | Time [s] |Temperature [°

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭281SymbolSelection of the symbol for the display of the individual measuring points.Selection5 symbo

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭21NoteWhen using variables, always observe their data type (Number, Text orDate/Tim

4.8 Subwindow curves￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭282￭￭￭￭￭￭￭￭tiBase 1.04.8.3.5 Curve properties - OptionsDialog window: Database ▶ Curves ▶ Properties curve

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭4 DatabasetiBase 1.0￭￭￭￭￭￭￭￭283BackgroundBackground colorSelection of the color for the curve background.Selection13 colors | wh

4.8 Subwindow curves￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭284￭￭￭￭￭￭￭￭tiBase 1.04.8.3.6 Curve properties - Measuring point listDialog window: Database ▶ Curves ▶ Pro

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭2855 How to proceed?5.1 Backup5.1.1 Backing up databaseHow to proceed?GeneralIn tiBase , d

5.1 Backup￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭286￭￭￭￭￭￭￭￭tiBase 1.0 5Select the directory for the backup in the field Backup directory. 6Select or enter the name fo

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭287 9Click on [OK].The dialog window Properties - Database is closed and the databasewill be

5.1 Backup￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭288￭￭￭￭￭￭￭￭tiBase 1.0tration (see Chapter 3.2.1.1, page 74), Program administration(seeChapter 3.2.3.1, page 91) and t

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭289 2Click on menu item File ▶ Backup ▶ Automatically.The dialog window Backup configuration

5.2 Determinations￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭290￭￭￭￭￭￭￭￭tiBase 1.0 2Start the file ConfigRestore.exe in the program directory...\TiBaser\bin on the server.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭2915.2.2 Filter determinationsHow to proceed?Opening the database 1Select program part Datab

Metrohm AGCH-9101 HerisauSwitzerlandPhone +41 71 353 85 85Fax +41 71 353 89 [email protected] 1.0Online help8.101.8025EN 10.2009

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭22￭￭￭￭￭￭￭￭tiBase 1.0ppmµ L1 Density of thesample in g/mLmg/mL g Density of thesample in g/mL1mg/mL mL 1 1mg 1

5.2 Determinations￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭292￭￭￭￭￭￭￭￭tiBase 1.0Defining and using special filter 1Click on the symbol or on Filter ▶ Special filter in

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭293 5Select desired determination.Signature 1NoteDeterminations can only be signed at level 1

5.2 Determinations￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭294￭￭￭￭￭￭￭￭tiBase 1.0The window Signature Level 2 opens. If the selected determinationcan be signed, Signature

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭295 2Click on the symbol or the menu item File ▶ Open...The dialog window Open database op

5.2 Determinations￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭296￭￭￭￭￭￭￭￭tiBase 1.0 5Click on the menu item Determinations ▶ Import... or the symbol.The window Import dete

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭297NoteIf the option Comment on modification of determinations inthe Security settings is ena

5.2 Determinations￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭298￭￭￭￭￭￭￭￭tiBase 1.05.2.8 Reprocessing determinationsHow to proceed?NoteDeterminations that have a signature

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭299The selected determinations are recalculated. The results of this recal-culation are enter

5.2 Determinations￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭300￭￭￭￭￭￭￭￭tiBase 1.0 7In the dialog window Reprocessing click on [OK].Each determination that has been modifi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭301NoteIf the results of a determination are switched off, the statistics forthese results wi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭23NoteIf the PC/LIMS report contains a negative value for the sample size (fromrewe

5.2 Determinations￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭302￭￭￭￭￭￭￭￭tiBase 1.0 6Click on [Recalculate].The selected determinations are recalculated. The results of thi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭303 7Under Selection, select desired determinations. 8Under Report type, select the option Or

5.3 Databases￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭304￭￭￭￭￭￭￭￭tiBase 1.0 5Select desired determinations. 6Click on menu item File ▶ Print ▶ Determination overview….Th

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭3055.3.2 Open databaseHow to proceed?1Select program part Database. 2Click on the symbol o

5.3 Databases￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭306￭￭￭￭￭￭￭￭tiBase 1.0All opened databases will be closed.5.3.4 Create databaseHow to proceed?1Select program part

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭3075.3.5 Backing up databaseHow to proceed?Backing up database manually 1Select program part

5.3 Databases￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭308￭￭￭￭￭￭￭￭tiBase 1.0The dialog window Properties - Database - 'Database name'opens for editing the datab

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭309The database restoring is started.NoteExisting databases cannot be overwritten, i.e. they

5.4 Configuration data￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭310￭￭￭￭￭￭￭￭tiBase 1.05.4.2 Export configuration dataHow to proceed?1Select program part Configuration. 2C

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭311NoteData that is not present in the export file cannot be selected. 6Click on [OK].The imp

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭24￭￭￭￭￭￭￭￭tiBase 1.0Variablename(PC-Control)Variablename( tiBase 1.0 )Description Command.BM# .BP{x}.MEA Measu

5.4 Configuration data￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭312￭￭￭￭￭￭￭￭tiBase 1.0Backup configuration data automatically 1Select program part Configuration. 2Click on

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭313tiBase multi 1Make sure that tiBase is closed on all clients connected to the serverand o

5.5 Import of PC/LIMS reports￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭314￭￭￭￭￭￭￭￭tiBase 1.0The path is entered in the field Data source. 7Select the database in which th

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭3155.5.3 Edit importHow to proceed?1Select program part Configuration. 2In the subwindow Imp

5.5 Import of PC/LIMS reports￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭316￭￭￭￭￭￭￭￭tiBase 1.0 13Click on [Select].The path is entered in the field Directory.5.5.4 Import

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭317 11Activate the option button Move file if the PC/LIMS reports are to bemoved from the sou

5.5 Import of PC/LIMS reports￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭318￭￭￭￭￭￭￭￭tiBase 1.0 6In the context menu, click on Modify drive letter and pathsThe dialog window

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭319The new drive letter must not have been used. Neither by a USB stickwhich is not connected

5.5 Import of PC/LIMS reports￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭320￭￭￭￭￭￭￭￭tiBase 1.0 11Activate the option button Move file if the PC/LIMS reports are to bemoved

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭3215.5.7 Delete import protocolHow to proceed?1Select program part Configuration. 2In the su

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭25Variablename(PC-Control)Variablename( tiBase 1.0 )Description Command.ESI# .EP{x}

5.6 Reports￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭322￭￭￭￭￭￭￭￭tiBase 1.0 8Close the dialog window with [OK]. 9Select desired module symbol on the Module bar and place i

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭323 6Define desired settings for the report format. 7Close the dialog window with [OK]. 8In t

5.6 Reports￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭324￭￭￭￭￭￭￭￭tiBase 1.0The report template is saved.5.6.3 Printing determination report How to proceed?1Select program

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭5 How to proceed?tiBase 1.0￭￭￭￭￭￭￭￭325NoteIf several reports are produced simultaneously as a PDF file then anindex will be auto

5.7 No Help available￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭326￭￭￭￭￭￭￭￭tiBase 1.0 8Under Orientation, select the option Portrait format or Landscapeformat. 9Click on [

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭IndextiBase 1.0￭￭￭￭￭￭￭￭327IndexNummern/Symbole21 CFR 11 ... 8, 82, 83, 88AAbsolute value ...

Index￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭328￭￭￭￭￭￭￭￭tiBase 1.0Print report ... 245Properties ... 123Rename ...

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭IndextiBase 1.0￭￭￭￭￭￭￭￭329TextToNumber ... 56TextToTime ... 57Time() ...

Index￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭330￭￭￭￭￭￭￭￭tiBase 1.0Import with USB stick ... 316PDF output ... 101Periodic system ...

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭IndextiBase 1.0￭￭￭￭￭￭￭￭331TTangent evaluation ... 227Text editor ... 67TextPosition .

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭26￭￭￭￭￭￭￭￭tiBase 1.0Variablename(PC-Control)Variablename( tiBase 1.0 )Description Command.MIT .ITE Initial tem

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭27Variablename(PC-Control)Variablename( tiBase 1.0 )Description Command.RD# .RE{x}.

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭28￭￭￭￭￭￭￭￭tiBase 1.01) HNP = Half neutralization potential2.4.3.5 Result variablesDialog window: Formula Edit

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭29Examples: 'DV.DUR', 'DV.STT'You can select the determination

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭30￭￭￭￭￭￭￭￭tiBase 1.0Variablename(PC-Control)Variablename( tiBase 1.0 )Description Data typeSNT .STA Indication

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭31￭ Determination of a blank value which will be taken into account duringthe conte

TeachwareMetrohm AGCH-9101 [email protected] documentation is protected by copyright. All rights reserved.Although all the information

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭32￭￭￭￭￭￭￭￭tiBase 1.0￭ MEAS IpolVoltametric measurement with selectable polarization current￭ MEAS pHPotentiome

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭33Overview of the operators and functionsOperators FunctionsArithmetic:￭ Addition (

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭34￭￭￭￭￭￭￭￭tiBase 1.02.4.4.2 Arithmetical operators2.4.4.2.1 AdditionDialog window: Formula editor ▶ Operator

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭352.4.4.2.2 SubtractionDialog window: Formula editor ▶ Operators/FunctionsSyntaxOp

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭36￭￭￭￭￭￭￭￭tiBase 1.0ExamplesOperand1 Operand2 Result Example RemarkOperands of the same type:Number Number Num

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭37Operand1 Operand2 Result Example RemarkOperand of different type: The operand whi

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭38￭￭￭￭￭￭￭￭tiBase 1.0Operand1 Operand2 Result Example RemarkTime Number NumberTime(1999;10;7) ^ 2.5 =2534798478

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭39Oper-and1Oper-and2Result Example RemarkNumber Text Number1.2 AND "1.2"

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭40￭￭￭￭￭￭￭￭tiBase 1.0Operand1 Operand2 Result Example RemarkNumber Number Number5 OR 4 --> 14 OR 0 --> 1N

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭41The operands can be entered either directly or as a variable and can be ofthe typ

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭Table of contentstiBase 1.0￭￭￭￭￭￭￭￭IIITable of contents1 Introduction 11.1 Welcome to tiBase ...

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭42￭￭￭￭￭￭￭￭tiBase 1.02.4.4.4.2 Greater thanDialog window: Formula editor ▶ Operators/FunctionsSyntaxOperand1 &

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭432.4.4.4.3 Greater than or equal toDialog window: Formula editor ▶ Operators/Func

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭44￭￭￭￭￭￭￭￭tiBase 1.02.4.4.4.4 Less than Dialog window: Formula editor ▶ Operators/FunctionsSyntaxOperand1 <

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭452.4.4.4.5 Less than or equal to Dialog window: Formula editor ▶ Operators/Functi

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭46￭￭￭￭￭￭￭￭tiBase 1.02.4.4.4.6 Not equal to Dialog window: Formula editor ▶ Operators/FunctionsSyntaxOperand1

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭472.4.4.5 Arithmetical functions2.4.4.5.1 Exponential functionDialog window: Form

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭48￭￭￭￭￭￭￭￭tiBase 1.02.4.4.5.3 Common logarithmDialog window: Formula editor ▶ Operators/FunctionsSyntaxy = Lo

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭492.4.4.5.5 Absolute valueDialog window: Formula editor ▶ Operators/FunctionsSynta

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭50￭￭￭￭￭￭￭￭tiBase 1.02.4.4.5.7 IntegerDialog window: Formula editor ▶ Operators/FunctionsSyntaxy = Int(number)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭512.4.4.5.9 SignDialog window: Formula editor ▶ Operators/FunctionsSyntaxy = Sign(

Table of contents￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭IV￭￭￭￭￭￭￭￭tiBase 1.03 Configuration 703.1 Configuration - General ...

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭52￭￭￭￭￭￭￭￭tiBase 1.0Type number, value range: 1 ... n. Direct entry as number or as formulaproviding a number.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭53NoteUTC = Universal Time , from which the times in the various time zones ofthe e

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭54￭￭￭￭￭￭￭￭tiBase 1.0NoteUTC = Universal Time , from which the times in the various time zones ofthe earth are

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭55NoteOnly the integral part is used for all parameters.A variable of the type Date

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭56￭￭￭￭￭￭￭￭tiBase 1.0ExamplesNumberToText(-55.3) = -55.3NumberToText('CV.AverageTemp') = Vale of the

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭57TextToNumber('CV.DurchschnTemp') = Value of the variables (Avera-geTemp

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭58￭￭￭￭￭￭￭￭tiBase 1.0ExamplesTextToTime("2004-12-3 5:22:01 PM";"yMdhmsa") = 2004-12-0317:22

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭592.4.4.7.6 TimeToTextDialog window: Formula editor ▶ Operators/FunctionsSyntaxy =

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭60￭￭￭￭￭￭￭￭tiBase 1.0Characters Significance ExampleEWeekday short formMon, Tue, WedEEEEWeekdayMonday, TuesdayD

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭612.4.4.8 Text functions2.4.4.8.1 TextPositionDialog window: Formula editor ▶ Ope

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭Table of contentstiBase 1.0￭￭￭￭￭￭￭￭V4.3.4 Delete database ... 12

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭62￭￭￭￭￭￭￭￭tiBase 1.02.4.4.8.2 SubTextDialog window: Formula editor ▶ Operators/FunctionsSyntaxy = SubText(Tex

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭63ParametersTextThe parameter can be indicated either directly or as a variable of

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭64￭￭￭￭￭￭￭￭tiBase 1.0the type Text, Number or Date/Time. Entire operations can also be trans-ferred here.Value_

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭652.4.4.10 ASCII tableDialog window: Formula editorOnly characters that can be pri

2.4 Formula editor￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭66￭￭￭￭￭￭￭￭tiBase 1.0ASCII value(dec)Characters ASCII value(dec)Characters ASCII value(dec)Characters55 7 87 W

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭672.5 Editing2.5.1 Select dateDialog window: Select dateThe dialog window Select

2.5 Editing￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭68￭￭￭￭￭￭￭￭tiBase 1.0Open formula editor for entering calculation formulas .(see Chapter 2.4,page 17)NoteIn order for

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭2 General program functionstiBase 1.0￭￭￭￭￭￭￭￭69Link targetAddress of the link target to which the hyperlink refers (Web site, E-

3.1 Configuration - General￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭70￭￭￭￭￭￭￭￭tiBase 1.03 Configuration3.1 Configuration - General3.1.1 Configuration - DefinitionProg

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭713.1.3 Configuration - Menu bar3.1.3.1 Configuration - Main menusProgram part: Configuration

Table of contents￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭VI￭￭￭￭￭￭￭￭tiBase 1.05.2.10 Printing determination overview ... 3035.3 D

3.1 Configuration - General￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭72￭￭￭￭￭￭￭￭tiBase 1.03.1.3.4 Configuration - Menu ToolsProgram part: ConfigurationUser administra-tio

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭73PresentationThe subwindows can be enlarged or made smaller to suit by dragging theseparating

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭74￭￭￭￭￭￭￭￭tiBase 1.03.1.7 View3.1.7.1 Views - GeneralProgram part: ConfigurationDefinitionThe term View defi

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭75The user administration data can be exported and imported. In this way thisdata can be exchan

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭76￭￭￭￭￭￭￭￭tiBase 1.03.2.1.2 User groups3.2.1.2.1 User groups - DetailsDialog window: Configuration ▶ Tools ▶

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭77inactiveThe user can no longer log in. The Administrator must first assign him/her the status

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭78￭￭￭￭￭￭￭￭tiBase 1.0Selectionoff | onDefault valueoffSignature Level 2 (lock)If this check box is enabled then

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭79Input24 charactersWith [OK] a new group is generated under this name with standard settings;i

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭80￭￭￭￭￭￭￭￭tiBase 1.0NoteIt is only possible to delete a user group when the group no longer con-tains any user

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭81removedUsers with the status removed can no longer log in. If the status of auser is changed

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭1 IntroductiontiBase 1.0￭￭￭￭￭￭￭￭11 Introduction1.1 Welcome to tiBaseIntroductiontiBase is a program for administrating analys

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭82￭￭￭￭￭￭￭￭tiBase 1.0UserShort name of new user that must be used to log in at program start. Afterthe name has

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭83￭ ModificationsEnable/Disable comments when determinations are modified.￭ SignaturesOptions f

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭84￭￭￭￭￭￭￭￭tiBase 1.0Selectionon | offDefault valueoffFDA default: onPassword monitoring by WindowsIf this opti

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭85Message by E-mailIf this check box is activated then an E-mail will be sent to the addressdef

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭86￭￭￭￭￭￭￭￭tiBase 1.0Selectionon | offDefault valueoffFDA default: offAutomatic logout afterIf this check box i

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭87Selectionon | offDefault valueoffFDA default: onRange1 ... 10 CharactersDefault value6 Charac

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭88￭￭￭￭￭￭￭￭tiBase 1.0[Set]Sets the parameters to the default settings.Comment on modification of determinations

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭893.2.2.6 Default reasons Tab: Configuration ▶ Tools ▶ Security settings ▶ Default reasonsOn t

3.2 Administration￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭90￭￭￭￭￭￭￭￭tiBase 1.0MessageThe message defined here will be transmitted as an E-mail if the maximumpermitted n

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭3 ConfigurationtiBase 1.0￭￭￭￭￭￭￭￭91UserName of the user for access to mail server. The name need not agree withthe Windows user