Metrohm 860 KF Thermoprep Manuel d'utilisateur télécharger pdf (Page 17)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Installation

860 KF Thermoprep

￭￭￭￭￭￭￭￭

3.3 Mounting the guidance rod

The guidance rod with the guide head is enclosed separately with the 860

KF Thermoprep and must first be mounted.

Proceed as follows:

Move the guide head of the guidance rod a bit downwards by press-

ing the fixing lever.

Figure 4 Loosen the adapter

Loosen the adapter on the head of the guidance rod with a hexagon

key.

Remove the adapter.

Insert the tubing jutting out of the housing from below into the guid-

ance rod.

Note

This tubing conveys the gas from the flow controller upward

through the guidance rod to the guide head. From there the gas is

guided to the double hollow needle, see next chapter.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Pas de commentaire

Metrohm 860 KF Thermoprep Manuel d'utilisateur Page 17